NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall Reference Manual page 300

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
The Known PCs and Devices table contains a list of all known PCs and network devices that
are assigned dynamic IP addresses by the VPN firewall, or have been discovered by other
means. Collectively, these entries make up the network database.
For each PC or device, the following fields are displayed:
• Check box. Allows you to select the PC or device in the table.
• Name. The name of the PC or device. For computers that do not support the NetBIOS
protocol, the name is displayed as "Unknown" (you can edit the entry manually to add a
meaningful name). If the PC or device was assigned an IP address by the DHCP server,
then the name is appended by an asterisk.
• IP Address. The current IP address of the PC or device. For DHCP clients of the VPN
firewall, this IP address does not change. If a PC or device is assigned a static IP address,
you need to update this entry manually after the IP address on the PC or device has
changed.
• MAC Address. The MAC address of the PC or device's network interface.
• Group. Each PC or device can be assigned to a single LAN group. By default, a PC or
device is assigned to Group 1. You can select a different LAN group from the Group
drop-down list in the Add Known PCs and Devices section or on the Edit Groups and
Hosts screen (see
• Profile Name. The VLAN to which the PC or device is assigned.
• Action. The Edit table button that provides access to the Edit Groups and Hosts screen.
Note: If the VPN firewall is rebooted, the data in the Known PCs and Devices table
is lost until the VPN firewall rediscovers the devices.
Viewing the DHCP Log
To review the most recent entries in the DHCP log:
1. Select Network Configuration > LAN Settings from the menu. The LAN Settings submenu
tabs display, with the LAN Setup screen in view
2. Click the DHCP Log option arrow at the top right of the LAN Setup screen. The DHCP Log
displays in a popup window (see
To view the most recent entries, click the Refresh Log button. To delete all the existing log
entries, click the Clear Log button.
9-24
Figure 3-7 on page 3-18).
Figure 9-16 on page
v1.0, April 2010
(Figure 3-2 on page 3-6).
9-25).
Monitoring System Access and Performance