NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall Reference Manual page 149
Gigabit quad wan ssl vpn firewall
Hide thumbs
Also See for SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall:
- Configuration manual (8 pages) ,
- Use manual (9 pages) ,
- Network setup manual (8 pages)
Table of Contents
Advertisement
4. Click Apply to save your settings. The IPsec VPN policy is now added to the List of VPN
Policies table on the VPN Policies screen. By default, the VPN policy is enabled.
Figure 5-6
5. Configure a VPN policy on the remote gateway that allows connection to the VPN firewall.
6. Activate the IPsec VPN connection:
a. Select VPN > Connection Status from the menu. The VPN Connection Status submenu
tabs display, with the IPSec VPN Connection Status screen in view.
Figure 5-7
b. Locate the policy in the table, and click the Connect table button. The IPsec VPN
connection should become active.
Virtual Private Networking Using IPsec Connections
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
v1.0, April 2010
5-7
Advertisement
Table of Contents
Troubleshooting
