NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall Reference Manual page 224
Gigabit quad wan ssl vpn firewall
Hide thumbs
Also See for SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall:
- Configuration manual (8 pages) ,
- Use manual (9 pages) ,
- Network setup manual (8 pages)
Table of Contents
Advertisement
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
Table 6-5.
Add SSL VPN Policy
Item
Description (or Subfield and Description)
Apply
IP Network
Policy For
(continued)
All
Addresses
6-22
Settings (continued)
Policy Name A descriptive name of the SSL VPN policy for identification
and management purposes.
IP Address
The network IP address to which the SSL VPN policy is
applied.
Subnet Mask The network subnet mask to which the SSL VPN policy is
applied.
Port Range /
A port (enter in the Begin field) or a range of ports (enter in
Port Number
the Begin and End fields) to which the SSL VPN policy is
applied. Ports can be 0 through 65535. The policy is applied
to all TCP and UDP traffic that passes on those ports. Leave
the fields blank to apply the policy to all traffic.
Service
From the drop-down list, select the service to which the SSL
VPN policy is applied:
• VPN Tunnel. The policy is applied only to a VPN tunnel.
• Port Forwarding. The policy is applied only to port
forwarding.
• All. The policy is applied both to a VPN tunnel and to port
forwarding.
Permission
From the drop-down list, select whether the policy permits
(PERMIT) or denies (DENY) access.
Policy Name A descriptive name of the SSL VPN policy for identification
and management purposes.
Port Range /
A port (enter in the Begin field) or a range of ports (enter in
Port Number
the Begin and End fields) to which the SSL VPN policy is
applied. Ports can be 0 through 65535. The policy is applied
to all TCP and UDP traffic that passes on those ports. Leave
the fields blank to apply the policy to all traffic.
Service
From the drop-down list, select the service to which the SSL
VPN policy is applied:
• VPN Tunnel. The policy is applied only to a VPN tunnel.
• Port Forwarding. The policy is applied only to port
forwarding.
• All. The policy is applied both to a VPN tunnel and to port
forwarding.
Permission
From the drop-down list, select whether the policy permits
(PERMIT) or denies (DENY) access.
Virtual Private Networking Using SSL Connections
v1.0, April 2010
Advertisement
Table of Contents
Troubleshooting
