NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall Reference Manual page 86

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
3. Enter the settings as explained in
Table 3-4. Static Route Settings
Setting
Route Name
Active
Private
Destination IP Address The destination IP address of the host or network to which the route leads.
Subnet Mask
Interface
Gateway IP Address
Metric
4. Click Apply to save your settings. The new static route is added to the Static Route table.
To edit a static route that is in the Static Route table:
1. Select its entry from the table and click the Edit table button in the Action column. The Edit
Static Route screen displays. This screen is identical to the Add Static Route screen that is
described earlier in this section with the exception that you cannot change the name of the
static route.
2. Enter the settings as explained in
3. Click Apply to save your settings.
3-26
Table 3-4.
Description (or Subfield and Description)
The route name for the static route (for purposes of identification and
management).
To make the static route effective, select the Active check box.
Note: A route can be added to the table and made inactive, if not needed. This
allows routes to be used as needed without deleting and re-adding the entry.
an inactive route is not advertised if RIP is enabled.
If you want to limit access to the LAN only, select the Private check box. Doing
so prevents the static route from being advertised in RIP.
The IP subnet mask of the host or network to which the route leads. If the
destination is a single host, enter 255.255.255.255.
From the drop-down list, select the interface that is the physical network
interface (WAN1, WAN2, WAN3, WAN4, or DMZ) or virtual interface (VLAN
profile) through which the route is accessible.
The gateway IP address through which the destination host or network can be
reached.
The priority of the route. Select a value between 2 and 15. If multiple routes to
the same destination exist, the route with the lowest metric is used.
Table 3-4.
v1.0, April 2010
LAN Configuration