NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall Reference Manual page 123

2. In the Add Customer Service section of the screen, enter the settings as explained in
Table 4-6. Services Settings
Setting Description (or Subfield and Description)
Name A descriptive name of the service for identification and management purposes.
Type From the Type drop-down list, select the Layer 3 protocol that the service uses as its
transport protocol:
• TCP.
• UDP.
• ICMP.
ICMP Type A numeric value that can range between 0 and 40. For a list of ICMP types, see
http://www.iana.org/assignments/icmp-parameters
This field is enabled only when you select ICMP from the Type drop-down list.
Start Port The first TCP or UDP port of a range that the service uses.
This field is enabled only when you select TCP or UDP from the Type drop-down list.
Finish Port The first TCP or UDP port of a range that the service uses. If the service uses only a
single port number, enter the same number in the Start Port and Finish Port fields.
This field is enabled only when you select TCP or UDP from the Type drop-down list.
3. Click Apply to save your settings. The new custom service is added to the Custom Services
Table.
To edit a service:
1. In the Custom Services table, click the Edit table button to the right of the service that you
want to edit. The Edit Service screen displays.
Figure 4-20
2. Modify the settings that you wish to change (see
Firewall Protection
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
v1.0, April 2010
.
Table 4-6 on page 4-33).
Table 4-6.
4-33