NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall Reference Manual page 337
Gigabit quad wan ssl vpn firewall
Hide thumbs
Also See for SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall:
- Configuration manual (8 pages) ,
- Use manual (9 pages) ,
- Network setup manual (8 pages)
Table of Contents
Advertisement
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
VPN Telecommuter: Dual Gateway WAN Ports for Improved Reliability
In a dual WAN port auto-rollover gateway configuration, the remote PC client initiates the VPN
tunnel with the active gateway WAN port (port WAN1 in
Figure
B-18) because the IP address of
the remote NAT router is not known in advance. The gateway WAN port must act as the responder.
Figure B-18
The IP addresses of the gateway WAN ports can be either fixed or dynamic, but you must always
use an FQDN because the active WAN port could be either WAN1 or WAN2 (that is, the IP
address of the active WAN port is not known in advance).
After a rollover of the WAN port has occurred, the previously inactive gateway WAN port
becomes the active port (port WAN2 in
Figure
B-19) and the remote PC must reestablish the VPN
tunnel. The gateway WAN port must act as the responder.
Figure B-19
Network Planning for Multiple WAN Ports
B-17
v1.0, April 2010
Advertisement
Table of Contents
Troubleshooting
