NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall Reference Manual page 69

Table 3-1. VLAN Profile Settings (continued)
Setting
Enable DHCP
Server
DHCP Relay
LAN Configuration
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
Description (or Subfield and Description)
Select the Enable DHCP Server radio button to enable the VPN firewall to
function as a Dynamic Host Configuration Protocol (DHCP) server, providing
TCP/IP configuration for all computers connected to the VLAN. Enter the
following settings.
Domain Name This is optional. Enter the domain name of the VPN firewall.
Start IP Enter the starting IP address. This address specifies the first
of the contiguous addresses in the IP address pool. Any new
DHCP client joining the LAN is assigned an IP address
between this address and the ending IP address. The IP
address 192.168.1.2 is the default start address.
End IP Enter the ending IP address. This address specifies the last
of the contiguous addresses in the IP address pool. Any new
DHCP client joining the LAN is assigned an IP address
between the starting IP address and this IP address. The IP
address 192.168.1.100 is the default ending address.
Note: The starting and ending DHCP IP addresses should be
in the same "network" as the IP address of the VPN firewall
(that is, the IP address in the
screen).
Primary DNS This is optional. If an IP address is specified, the VPN firewall
Server provides this address as the primary DNS server IP address.
If no address is specified, the VPN firewall uses the VLAN IP
address as the primary DNS server IP address.
Secondary DNS This is optional. If an IP address is specified, the VPN firewall
Server provides this address as the secondary DNS server IP
address.
WINS Server This is optional. Enter a WINS server IP address to specify
the Windows NetBIOS server, if one is present in your
network.
Lease Time Enter a lease time. This specifies the duration for which IP
addresses are leased to clients.
Select the DHCP Relay radio button to use the VPN firewall as a DHCP relay
agent for a DHCP server somewhere else on your network. Enter the following
setting:
Relay Gateway The IP address of the DHCP server for which the VPN
firewall serves as a relay.
v1.0, April 2010
"IP Setup" section of the
3-9