NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall Reference Manual page 135

By default, the source MAC address filter is disabled. All the traffic received from PCs with any
MAC address is allowed. When the source MAC address filter is enabled, depending on the
selected policy, traffic is either permitted or blocked if it comes from any PCs or devices whose
MAC addresses are listed in MAC Addresses table.
Note: For additional ways of restricting outbound traffic, see
Blocking)" on page
To enable MAC filtering and add MAC addresses to be permitted or blocked:
1. Select Security > Address Filter from the menu. The Address Filter submenu tabs display,
with the Source MAC Filter screen in view (see
MAC Addresses table as an example).
Figure 4-27
2. In the MAC Filtering Enable section, select the Yes radio button.
Firewall Protection
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
4-4.
v1.0, April 2010
"Outbound Rules (Service
Figure 4-27, which shows one address in the
4-45