NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall Reference Manual page 298

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
2. Click the Status button in the Action column of the WAN interface for which you want to
view the connection status. The Connection Status screen appears in a popup window.
Figure 9-14
The Connection Status screen displays the information that is described in
information that is shown on the Connection Status screen depends on the nature of the
connection—static IP address or dynamically assigned IP address. Therefore, not all
information that is described in
Table 9-9. WAN Port Connection Status Information
Item
Connection Time
Connection Type
Connection Status
IP Address
Subnet Mask
Gateway
DNS Server
DHCP Server
Lease Obtained
Lease Duration
9-22
Table 9-9 might be shown.
Description (or Subfield and Description)
The period that the VPN firewall has been connected through the WAN port.
The connection type can be either DHCP or Static IP.
The connection status can be either Connected or Disconnected.
The addresses that were automatically detected (see
and Connecting" on page
Settings screen (see "Manually Configuring the Internet Connection" on
page 2-11).
The DHCP server that was automatically detected. This field is displayed only
when your ISP does not require a login and the IP address is acquired
dynamically from your ISP. You have configured these settings on the WAN ISP
Settings screen (see "Manually Configuring the Internet Connection" on
.
page 2-11)
The time when the DHCP lease was obtained.
The period that the DHCP lease remains in effect.
v1.0, April 2010
2-7) or that you have configured on the WAN ISP
Monitoring System Access and Performance
Table 9-9. The
"Automatically Detecting