NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall Reference Manual page 305

To capture packets:
1. In the Router Options section on the Diagnostics screen, next to Capture Packets, click the
Packet Trace button. The Capture Packets screen appears as a popup window.
Figure 9-19
2. From the Select Network drop-down list, select a WAN interface, DMZ interface (if enabled),
or VLAN.
3. Click the Start button to start capturing the traffic flow. The following text appears in the
popup window: "Packet tracing started. Click "stop" when done."
4. When you want to stop capturing the traffic flow, click the Stop button. The following text
appears in the popup window: "Packet tracing stopped. Click "download" to view captured
logs."
5. Click the Download button. Select a location to save the captured traffic flow. (The default file
name is pkt.CAP.) The file is downloaded to the location that you specify.
6. Send the file to NETGEAR Technical Support for analysis.
Monitoring System Access and Performance
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
v1.0, April 2010
9-29