NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall Reference Manual page 105

To access the DMZ WAN Rules screen:
1. Select Security > Firewall from the menu. The Firewall submenu tabs display.
2. Click the DMZ WAN Rules submenu tab. The DMZ WAN Rules screen displays.
shows a rule in the Outbound Services table as an example).
Figure 4-5
To make changes to an existing outbound or inbound service rule:
In the Action column to the right of the rule, click one of the following table buttons:
• Edit. Allows you to make any changes to the rule definition of an existing rule. Depending on
your selection, either the Edit DMZ WAN Outbound Service screen (identical to
page 4-16) or the Edit DMZ WAN Inbound Service screen (identical to
4-17) displays, containing the data for the selected rule.
• Up. Moves the rule up one position in the table rank.
• Down. Moves the rule down one position in the table rank.
To delete or disable one or more rules:
1. Select the check box to the left of the rule that you want to delete or disable, or click the Select
All table button to select all rules.
Firewall Protection
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
v1.0, April 2010
(Figure 4-5
Figure 4-6 on
Figure 4-7 on page
4-15