Displaying The Routing Table; Rebooting The Vpn Firewall; Capturing Packets - NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall Reference Manual

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual

Displaying the Routing Table

Displaying the internal routing table can assist NETGEAR Technical Support in diagnosing
routing problems.
To display the routing table, in the Router Options section on the Diagnostics screen, next to
Display the Routing Table, click the Display button. The routing table is displayed in the Route
Display screen that appears as a popup window.
Figure 9-18

Rebooting the VPN Firewall

You can perform a remote reboot (restart), for example, when the VPN firewall seems to have
become unstable or is not operating normally.
Note: Rebooting breaks any existing connections either to the VPN firewall (such as your
management session) or through the VPN firewall (for example, LAN users
accessing the Internet). However, when the reboot process is complete,
connections to the Internet are automatically reestablished if possible.
To reboot the VPN firewall, in the Router Options section on the Diagnostics screen, next to
Reboot the Router, click the Reboot button. The VPN firewall reboots. (If you can see the unit: the
reboot process is complete when the Test LED on the front panel goes off.)

Capturing Packets

You can capture packets to analyze traffic patterns with a network traffic analyzer tool. The
captured packet flow can show if traffic is flowing correctly to its destinations or if packets are
dropped. There is a limit to the size of the packet flow that you can capture in a file.
9-28 Monitoring System Access and Performance
v1.0, April 2010