NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall Reference Manual page 38

ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
7. In the Internet (IP) Address section of the screen, configure the IP address settings as
explained in Table
address.
Figure 2-11
Table 2-3. Internet (IP) Address Settings
Setting Description (or Subfield and Description)
Get Dynamically If your ISP has not assigned you a static IP address, select the Get Dynamically
from ISP from ISP radio button. The ISP automatically assigns an IP address to the VPN
firewall using DHCP network protocol.
Client Identifier
Vendor Class Identifier
Use Static IP If your ISP has assigned you a fixed (static or permanent) IP address, select the Use
Address Static IP Address radio button and enter the following settings:
IP Address
Subnet Mask
Gateway IP Address
2-14
2-3. Click the Current IP Address link to see the currently assigned IP
Select the Client Identifier check box if your ISP requires
the Client Identifier information to assign an IP address
using DHCP.
Select the Vendor Class Identifier check box if your ISP
requires the Vendor Class Identifier information to assign
an IP address using DHCP.
Static IP address assigned to you. This address identifies
the VPN firewall to your ISP.
The subnet mask is usually provided by your ISP.
The IP address of the ISP's gateway is usually provided by
your ISP.
v1.0, April 2010
Connecting the VPN Firewall to the Internet