NETGEAR SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall Reference Manual page 112
Gigabit quad wan ssl vpn firewall
Hide thumbs
Also See for SRX5308 - ProSafe® Quad WAN Gigabit SSL VPN Firewall:
- Configuration manual (8 pages) ,
- Use manual (9 pages) ,
- Network setup manual (8 pages)
Table of Contents
Advertisement
ProSafe Gigabit Quad WAN SSL VPN Firewall SRX5308 Reference Manual
Figure 4-12
LAN WAN or DMZ WAN Inbound Rule: Setting Up One-to-One NAT Mapping
In this example, we will configure multi-NAT to support multiple public IP addresses on one WAN
interface. By creating an inbound rule, we will configure the VPN firewall to host an additional
public IP address and associate this address with a Web server on the LAN.
The following addressing scheme is used to illustrate this procedure:
•
NETGEAR VPN firewall:
–
WAN1 IP address: 99.180.226.101
–
LAN IP address subnet: 192.168.1.1; subnet 255.255.255.0
–
DMZ IP address subnet: 192.168.10.1; subnet 255.255.255.0
•
Web server PC on the VPN firewall's LAN
–
LAN IP address: 192.168.1.2
–
DMZ IP address: 192.168.10.2
–
Access to Web server is (simulated) public IP address: 192.168.55.110
4-22
v1.0, April 2010
Firewall Protection
Advertisement
Table of Contents
Troubleshooting
