When Memory Is Full - Ricoh SP 5200S Operating Instructions Manual

When Memory Is Full

This section describes likely causes of and possible solutions for problems related to full memory.
Message
"Memory is full. nn originals
have been scanned. Press
[Print] to copy scanned
originals. Do not remove
remaining originals."
"n" in the message
represents a changeable
number.
"Press [Continue] to scan
and copy remaining
originals."
• If you set [Memory Full Auto Scan Restart] in [Input / Output] of User Tools to [On], even if the
memory becomes full, the memory overflow message will not be displayed. The machine will make
copies of the scanned originals first, and then automatically proceed to scan and to copy the
remaining originals. In this case, the resulting sorted pages will not be sequential. For details about
Memory Full Auto Scan Restart, see "Input / Output ", Copy and Document Server Reference.
Causes
The scanned originals
exceed the number of pages
that can be stored in
memory.
The machine checked if the
remaining originals should
be copied, after the scanned
originals were printed.
When You Cannot Make Copies As Wanted
Solutions
Press [Print] to copy scanned originals
and cancel the scanning data. Press
[Stop] to cancel the scanning data and
not copy.
Remove all copies, and then press
[Continue] to continue copying. Press
[Stop] to stop copying.
2
45