Ricoh SP 5200S Operating Instructions Manual page 89

Message
"Memory Retrieval Error"
"No response from the
server. Authentication has
failed."
"Print overrun."
"Printing privileges have not
been set for this document."
"Receiving data failed."
"Selected ppr. size is not
supported. Job was
cancelled."
"Sending data failed."
Causes
A memory allocation error
occurred.
A timeout occurred while
connecting to the server for
LDAP authentication or
Windows Authentication.
Images were discarded
while printing.
The PDF document you have
tried to print has no
privileges to print.
Data reception was aborted. Resend the data.
Job reset is automatically
performed if the specified
paper size is incorrect.
The machine received a
command to stop
transmission from the printer
driver.
Messages Displayed When Using the Printer Function
Solutions
Turn off the main power switch, and
then back on again. If the message
appears again, replace the RAM.
Check the status of the server.
PCL 5e
On the printer driver's [Print
Quality] tab, select a lower
resolution in the "Resolution" area.
PCL 6
On the printer driver's [Detailed
Settings] tab, click [Print Quality]
in the "Menu:", and then select a
lower resolution in the
"Resolution:" list.
PostScript 3
On the printer driver's [Detailed
Settings] tab, click [Print Quality]
in the "Menu:", and then select a
lower resolution in the
"Resolution:" list.
Contact the owner of the document.
Specify the correct paper size, and
then print the file again.
Check if the computer is working
correctly.
4
87