When Memory Is Full - Ricoh Aficio DSc428 Installation And Operation Manual

When Memory Is Full

Note
❒ If you set [Memory Full Auto Scan Restart] in User Tools (see p.122 "Memory Full
Auto Scan Restart" ) to [Yes], even if memory becomes full, the memory over-
flow message will not be displayed. The machine will make copies of scanned
originals first, then automatically scan and copy remaining originals. When
this happens, the resulting sorted pages will not be sequential.
Message
Memory is full.
originals have been
scanned.
Press [Print] to
copy scanned origi-
nals. Do not remove
remaining originals.
Note
❒ Copying will stop and this
message will be displayed
when the memory is full.
Press [Resume] to
scan and copy re-
maining originals.
[Stop] [Resume]
Causes
The scanned original exceeds
*
the number of pages that can
be stored in memory.
The machine checks if the re-
maining originals should be
copied, after the scanned orig-
inal is printed.
If You Cannot Make Copies As You Want
Solutions
Press [Print] to print out al-
ready scanned originals and
then delete scan data.
Or, press [Clear] to simply de-
lete scan data.
To continue copying, remove
all copies, and then press
[Resume]. To stop copying,
press [Stop].
4
101