Ricoh SP 5200S Operating Instructions Manual page 101

When paper is not fed properly
Problem
Paper is not fed from the
selected tray.
Images are printed at a
slant.
Misfeeds occur frequently.
Misfeeds occur frequently.
Misfeeds occur frequently.
Misfeeds occur frequently.
Causes
When you are using a
Windows operating system,
printer driver settings
override those settings using
the display panel.
The paper is feeding in at a
slant.
The number of sheets loaded
exceeds the capacity of the
machine.
The paper tray's side fences
are set too tightly.
The paper is damp.
The paper is too thick or too
thin.
Other Printing Problems
Solutions
PCL 5e
On the printer driver's [Paper]
tab, select the desired input tray in
the "Input Tray:" list.
PCL 6
On the printer driver's [Detailed
Settings] tab, click [Paper] in the
"Menu:", select the desired input
tray in the "Input Tray:" list.
PostScript 3
On the printer driver's [Detailed
Settings] tab, click [Paper] in the
"Menu:", select the desired input
tray in the "Input Tray:" list.
Load the paper correctly. See "Loading
Paper", About This Machine.
• When loading paper into the
paper tray, load paper only as
high as the upper limit markings
on the side fences of the paper.
• When loading paper on the
bypass tray, load only as much
paper as can be held between
the guides on the bypass tray.
Push the side fences lightly, and then
reset them.
Use paper that has been stored in the
recommended temperature and
humidity conditions. See "Paper
Storage", About This Machine.
Use recommended paper. See
"Recommended Paper Sizes and
Types", About This Machine.
4
99