Windows Server 2008 R2 - Ricoh SP 5200S Operating Instructions Manual

• Available ports vary according to your Windows operating system or the type of interface. For
details, see "Confirming the Connection Method", Printer Reference.
• The PCL6 printer driver is installed in the language of your operating system.

Windows Server 2008 R2

This section describes the procedure under Windows Server 2008 R2.
1. On the [Start] menu, click [Control Panel].
2. Click [Hardware].
3. Click [Devices and Printers].
4. Click [Add a printer].
5. Follow the instructions in Add Printer Wizard.
If the printer driver is on a CD-ROM, the location of the driver is as follows:
• PCL 5e
32bit-driver: "\x86\DRIVERS\PCL5e\XP_VISTA\(language)\DISK1"
64bit-driver: "\X64\DRIVERS\PCL5e\X64\(language)\DISK1"
• PCL 6
32bit-driver: "\x86\DRIVERS\PCL6\XP_VISTA\MUI\DISK1"
64bit-driver: "\X64\DRIVERS\PCL6\X64\MUI\DISK1"
• PostScript 3
32bit-driver: "\x86\DRIVERS\PS\XP_VISTA\MUI\DISK1"
64bit-driver: "\X64\DRIVERS\PS\X64\MUI\DISK1"
If the installer starts, click [Cancel] to quit.
6. Specify a port.
• Available ports vary according to your Windows operating system or the type of interface. For
details, see "Confirming the Connection Method", Printer Reference.
• The PCL6 printer driver is installed in the language of your operating system.
Messages Displayed When Installing the Printer Driver
4
75