Messages Displayed On The Client Computer - Ricoh SP 5200S Operating Instructions Manual

Message
"Transmission has failed.
Insufficient memory in the
destination hard disk. To
check the current status,
press [Scanned Files
Status]."
"Transmission has failed. To
check the current status,
press [Scanned Files
Status]."
"Updating the destination list
has failed. Try again?"
"Updating the destination
list... Please wait. Specified
destination(s) or sender's
name has been cleared."
"Updating the destination
list... Please wait. Specified
destination(s) or sender's
name has been cleared."
"You do not have the
privileges to use this
function."

Messages Displayed on the Client Computer

This section describes likely causes of and possible solutions for the main error messages displayed on
the client computer when using the TWAIN driver. If a message not described here appears, act
according to the message.
Causes
Transmission has failed.
There was not enough free
space on the hard disk of the
SMTP server, FTP server, or
client computer at the
destination.
While a file was being sent,
a network error occurred
and the file could not be sent
correctly.
A network error has
occurred.
A specified destination or
sender's name was cleared
when the destination list in
the delivery server was
updated.
The destination list is being
updated from the network
using Web Image Monitor.
The logged in user name
does not have permission for
the selected function.
Messages Displayed When Using the Scanner Function
Solutions
Allocate sufficient space.
If the same message appears again
after scanning again, the cause could
be a mixed network, or else network
settings were changed during WSD
scanner transmission. Check with your
system administrator.
Check whether the server is connected.
Specify the destination or sender's
name again.
Wait until the message disappears. Do
not switch off the power while this
message is displayed. Depending on
the number of destinations to be
updated, there may be some delay
before you can resume operation.
Operations are not possible while this
message is displayed.
Contact your administrator about the
permission for the required function.
5
115