Ricoh SP 5200S Operating Instructions Manual page 90

4. Troubleshooting When Using the Printer Function
Message
"Staple has been cancelled." Stapling printing was
"The entered password is
incorrect."
"The print job has been
4
cancelled because capture
file(s) could not be stored:
Exceeded max. memory."
"The print job has been
cancelled because capture
file(s) could not be stored:
Exceeded max. number of
files."
"The print job has been
cancelled because capture
file(s) could not be stored:
Exceeded max. number of
pages per file."
"You do not have a privilege
to use this function. This job
has been cancelled."
"You do not have a privilege
to use this function. This job
has been cancelled."
"You do not have a privilege
to use this function. This
operation has been
cancelled."
If printing does not start, contact your service representative.
88
Causes
canceled.
The password of the
encrypted PDF file has been
entered incorrectly.
The hard disk became full
after a file was stored.
The maximum file capacity
of the Document Server was
exceeded.
The maximum page
capacity of the Document
Server was exceeded.
The entered login user name
or login password is not
correct.
The logged in user is not
allowed to use the selected
function.
The logged in user does not
have the privileges to
register programs or change
the paper tray settings.
Solutions
Check the paper orientation, paper
quantity, print orientation, and staple
position. Certain settings can produce
print results that might not be as
expected.
Enter the correct password.
Delete the files stored in the Document
Server or reduce the file size to be sent.
Delete the files stored in the Document
Server.
Delete some of the files stored in the
Document Server or reduce the number
of pages that you want to send.
Check that the user name and
password are correct.
Contact your administrator.
Contact your administrator.