When Scanning Is Not Done As Expected - Ricoh SP 5200S Operating Instructions Manual

When Scanning Is Not Done As Expected

This section describes causes and remedies when scan results are not as expected.
Problem
The scanned image is dirty.
The image is distorted or out
of position.
The image is distorted or out
of position.
The scanned image is upside
down.
No image results from
scanning.
Images are scanned in
rotated.
Causes
The exposure glass,
scanning glass, or ADF is
dirty.
The original was moved
during scanning.
The original was not pressed
flat against the exposure
glass.
The original was placed
upside down.
The original was placed
with the front and back
reversed.
If you set the original with its
top edge backward and
save full color/gray scale
images as a TIFF or JPEG
file, they are scanned in
rotated.
When Scanning Is Not Done As Expected
Solutions
Clean them. See "Cleaning the
Machine", About This Machine.
Do not move the original during
scanning.
Make sure the original is pressed flat
against the exposure glass.
Place the original in the correct
orientation. See "Setting of Original
Feed Type", Scanner Reference.
When the original is placed directly on
the exposure glass, the side to be
scanned must face down. When the
original is inserted into the ADF, the
side to be scanned must face up.
When placing an original directly on
the exposure glass, align its top edge
flush against the left side of the
exposure glass.
When inserting a stack of originals into
the ADF, insert them top edge leading
in. For details, see "Setting of Original
Feed Type", Scanner Reference.
5
123