Ricoh SP 5200S Operating Instructions Manual page 44

2. Troubleshooting When Using the Copy/Document Server Function
Combine
Problem
Copies made with the
"Booklet" or "Magazine"
function cannot be folded
2 into a book correctly.
When using "Combine",
parts of the image are not
copied.
Copies are not in correct
order.
Duplex
Problem
Cannot print in duplex
mode.
Cannot print in duplex
mode.
42
Causes
You have selected a setting
("Open to Left" or "Open to
Right") that does not match
the orientation of originals.
You specified a
reproduction ratio that does
not match the sizes of the
originals and copy paper.
You placed the originals in
the incorrect order.
Causes
You have loaded thin paper
2
lighter than 60 g/m (16 lb.
Bond), or thick paper
2
heavier than 163 g/m (90
lb. Index).
"Apply Duplex" is set to [No]
for "Paper Type".
Solutions
In [Copier / Document Server
Features], under [Edit], set
[Orientation: Booklet, Magazine]
properly.
When you specify a reproduction ratio
using Manual Paper Select mode,
make sure the ratio matches the
originals and the copy paper. Select
the correct reproduction ratio before
using Combine mode. See "One-Sided
Combine", "Two-Sided Combine", or
"Auto Reduce / Enlarge", Copy and
Document Server Reference.
When inserting a stack of originals into
the ADF, the last page should be on
the bottom.
If you place an original on the
exposure glass, start with the first page
to be copied.
Solutions
Change the paper.
In [Tray Paper Settings], under "Paper
Type", set "Apply Duplex" to [Yes]. For
details, see "Tray Paper Settings",
Network and System Settings
Reference.