Ricoh SP 5200S Operating Instructions Manual page 119

Message
"Cannot specify any more
scanning area."
"Clear Misfeed(s) in ADF."
"Communication error has
occurred on the network."
"Error has occurred in the
scanner driver."
"Error has occurred in the
scanner."
"Fatal error has occurred in
the scanner."
Causes
The maximum number of
registerable scan areas has
been exceeded.
A paper misfeed has
occurred inside the ADF.
A communication error has
occurred on the network.
An error has occurred in the
driver.
The application-specified
scan conditions have
exceeded the setting range
of the machine.
An unrecoverable error has
occurred in the machine.
Messages Displayed When Using the Scanner Function
Solutions
The maximum number of scanning
areas that can be stored is 100. Delete
unneeded scanning areas.
Remove jammed originals, and then
insert them again. For details, see p.
125 "Removing Jammed Paper".
Check whether the originals are
suitable to be scanned by the machine.
Check whether the client computer can
use the TCP/IP protocol.
• Check whether the network cable
is connected correctly to the client
computer.
• Check whether the Ethernet board
of the client computer is
recognized correctly by
Windows.
• Check whether the client
computer can use the TCP/IP
protocol.
• Check whether the scanning
settings made with the application
exceed the setting range of the
machine.
• Disable the client computer's own
firewall. For details, see Windows
Help.
An unrecoverable error has occurred
in the machine. Contact your service
representative.
5
117