Ricoh SP 5200S Operating Instructions Manual page 99

Problem
Images smudge when
rubbed. (Toner is not fixed.)
Images smudge when
rubbed. (Toner is not fixed.)
The printed image is different
from the image on the
computer's display.
When printing graphics, the
output and the screen are
different.
Images are smudged.
Causes
The specified paper type
and the paper that is
actually loaded might be
different. For example, thick
paper might be loaded but
not specified as the paper
type.
The fusing unit is
deteriorated or damaged.
Printing will be performed by
the machine's graphic
processing function.
If the printer driver is
configured to use the
graphics command, the
graphics command from the
machine is used to print.
Smudging can occur if a
printed side rubs against
things such as the corner of
the machine.
Other Printing Problems
Solutions
PCL 5e
On the printer driver's [Paper]
tab, select a proper paper type in
the [Type:] box.
PCL 6
On the printer driver's [Detailed
Settings] tab, click [Paper] in the
"Menu:", and then select a proper
paper type in the "Paper Type:"
list.
PostScript 3
On the printer driver's [Detailed
Settings] tab, click [Paper] in the
"Menu:", and then select a proper
paper type in the "Paper Type:"
list.
Replace the unit. See "Replacing
Machine Parts", About This Machine.
Only when using PCL 6
On the printer driver's [Detailed
Settings] tab, click [Print Quality]
in the "Menu:", and then select
[Raster] in the "Vector/Raster:"
list.
If you want to print accurately, set the
printer driver to print without using the
graphics command. See the printer
driver Help.
When removing copies from the output
tray, do so carefully to avoid scuffing
the printed side. If you are making
many copies, remove them in small
batches.
4
97