Table of Contents
Advertisement
MC55 AT Command Set
2.7 ATZ
2.7
ATZ Set all current parameters to user defined profile
Syntax
Exec Command
ATZ [
]
<value>
Response(s)
OK
PIN
ASC0
ASC1
MUX1
!
%
%
Reference(s)
V.25ter
Command Description
TA sets all current parameters to the user profile stored with
nated.
All defined GPRS contexts which are not activated or not online will be undefined (see
and
AT+CGQREQ
AT+CGQMIN
The user defined profile is stored to the non-volatile memory.
Parameter Description
(num)
<value>
[0]
Notes
•
First the profile will be set to factory default (see
profile will be loaded afterwards.
•
Any additional commands on the same command line may be ignored. A delay of 300 ms is required before
next command is sent, otherwise "OK" response may be corrupted.
MC55_ATC_V01.05
Confidential / Released
MUX2
MUX3
%
%
%
command).
Reset to user profile
Page 38 of 469
. If a connection is in progress, it will be termi-
AT&W
). If there is a valid user profile (stored with
AT&F
s
m
obile
,
AT+CGDCONT
), this
AT&W
2/10/04
Advertisement
Table of Contents
