Table of Contents
Advertisement
MC55 AT Command Set
3.1 AT+CMER
Unsolicited Result Code
+CIEV: <indDescr>,
A value of an indicator has changed.
Command Description
The read command returns the URC presentation mode
status
.
<ind>
The write command enables and disables the presentation of "
refers to the name of a "
<indDescr>
registered indicator events will be issued to the TE.
Parameter Description
(num)
<mode>
(&F)
0
1
2
3
(num)
<keyp>
(&F)
0
(num)
<disp>
(&F)
0
(num)
<ind>
(&F)
0
2
(num)
<bfr>
(&F)
0
(str)
<indDescr>
Name of indicator; for a list of all supported indicators please refer to
(num)
<indValue>
Value of indicator; for a list of all values for the supported indicators please refer to
MC55_ATC_V01.05
Confidential / Released
<indValue>
" indicator and
+CIEV
Discard "
" and "
+CIEV
Discard "
" and "
+CIEV
online data mode. Otherwise they are forwarded directly to the TE.
Buffer "
" and "
+CIEV
in online data mode, and flush them to the TE afterwards. Otherwise they are
forwarded directly to the TE.
Forward "
" and "
+CIEV
data mode, URCs are signaled via sending BREAK (100ms) and stored in a
buffer. Once it is back in command mode e.g. after
stored in the buffer will be output.
Keypad event reporting is not supported by MC55.
Display event reporting is not supported by MC55.
Disable indicator event reporting.
Enable indicator event reporting.
TA buffer of URCs defined within this command is cleared when
is entered.
Page 64 of 469
and among others, the indicator event reporting
<mode>
:
+CIEV
<indDescr>
is the new value of this indicator. All
<indValue>
" URCs.
^SLCC
" URCs when TA-TE link is reserved, e.g. in
^SLCC
" URCs in the TA while TA-TE link is reserved, e.g.
^SLCC
" URCs directly to the TE. If MC55 is in online
^SLCC
AT+CIND
s
m
obile
,
" URCs.
<indValue>
was entered, all URCs
+++
<mode>
and
.
AT^SIND
and
AT+CIND
AT^SIND
2/10/04
1..3
.
Advertisement
Table of Contents
