Atd><N> Originate Call To Phone Number Selected From Active Memory - Siemens MC55 Command Set

MC55 AT Command Set
7.5 ATD><n>
7.5 ATD><n> Originate call to phone number selected from active
memory
Syntax
Exec Command
[ ];
ATD><n> <mgsm>
Response(s)
ERROR
+CME ERROR: <err>
If no dialtone (parameter ATX2 or ATX4):
NO DIALTONE
If busy (parameter setting ATX3 or ATX4):
BUSY
If connection cannot be set up:
NO CARRIER
When TA returns to command mode after call release:
OK
If successfully connected:
OK
PIN ASC0 ASC1 MUX1
% % §
Reference(s)
V.25ter
Command Description
TA attempts to set up an outgoing call to the stored number. The termination character ";" is mandatory since
dialing from a phonebook is only supported for voice calls and for sending *# codes of Supplementary Services
or other functions.
Parameter Description
(num)
<n>
Integer type memory location in the range of locations available in the selected memory, i.e. the index number
returned by .
AT+CPBR
(str)
<mgsm>
String of GSM modifiers:
I Activates CLIR (disables presentation of own phone number to called party)
i Deactivates CLIR (enables presentation of own phone number to called party)
Notes
• This command may be aborted generally by receiving a character during execution. Abortion is not possible
MC55_ATC_V01.05
Confidential / Released
MUX2 MUX3
% § §
Page 145 of 469
s
m
obile
2/10/04