Siemens MC55 Command Set page 124

Hide thumbs Also See for MC55:
Table of Contents

Advertisement

MC55 AT Command Set
5.6 AT+CPWD
"PP"
"PC"
Supplementary Service Call Barring:
Supplementary Service "Call Barring" allows to specify conditions under which calls will be disallowed by the
network.
The availability of the Supplementary Services varies with the network. To benefit from call barring the client will
need to subscribe them, though a limited number of call barring types may be included in the basic tariff pack-
age.
: The Network Password needs to be supplied from the network provider or network oper-
<password length>
ator. Usually there is one 4 digit password which applies to all call barring options. For details contact your pro-
vider.
"AO"
"OI"
"OX"
"AI"
"IR"
"AB"
"AG"
"AC"
(num)
<password length>
4...8
(str)
<old password>
Password specified for the facility.
Parameter
<old password>
Take into account that a password may have already been set by factory, or that the service is subject to a pass-
word issued by the provider. See notes above or contact provider.
(str)
<new password>
New password. Mandatory, if
Note
To delete a password use the following syntax:
at+cpwd=
<facility>
Examples
EXAMPLE 1
To change PIN2
AT+CPWD="P2","0000","8888"
OK
MC55_ATC_V01.05
Confidential / Released
Service Provider Personalisation
Corporate Personalisation
BAOC (Bar All Outgoing Calls)
BOIC (Bar Outgoing International Calls)
BOIC-exHC (Bar Outgoing International Calls except to Home Country)
BAIC (Bar All Incoming Calls)
BIC-Roam (Bar Incoming Calls when Roaming outside the home country)
All Barring services
All outGoing barring services
All inComing barring services
length of password. The range of permitted length for a password depends on
the associated
<facility>
or in the description of parameter
can be ignored if no old password was allocated to the facility.
was an unblocking key (such as the Master Phone Code).
<old password>
,
<old password>
Page 124 of 469
. It is available from the test command response,
.
<facility>
(where "0000" = old PIN2 and "8888" = new PIN2)
PIN2 Password has been changed to "8888"
s
m
obile
2/10/04

Advertisement

Table of Contents
loading

Table of Contents