At+Cscs Select Te Character Set - Siemens MC55 Command Set

MC55 AT Command Set
2.12 AT+CSCS
2.12

AT+CSCS Select TE character set

Syntax
Test Command
AT+CSCS=?
Response(s)
+CSCS: (list of supported
OK
Read Command
AT+CSCS?
Response(s)
+CSCS: <chset>
OK
Write Command
AT+CSCS= [ ]
<chset>
Response(s)
OK
PIN ASC0 ASC1 MUX1
! % %
Reference(s)
GSM 07.07, GSM 11.11
Command Description
Write command informs TA which character set
strings correctly between TE and ME character sets.
Parameter Description
(str)
<chset>
(&F)
"GSM"
"UCS2"
MC55_ATC_V01.05
Confidential / Released
s)
<chset>
MUX2 MUX3
% % %
<chset>
GSM default alphabet (GSM 03.38 subclause 6.2.1);
Note: This setting may cause software flow control problems since the codes
used to stop and resume data flow (XOFF = decimal 19, XON = decimal 17)
are interpreted as normal characters.
16-bit universal multiple-octet coded character set (ISO/IEC10646 [32]); UCS2
character strings are converted to hexadecimal numbers from 0000 to FFFF;
e.g. "004100620063" equals three 16-bit characters with decimal values 65, 98
and 99, $(AT R97)$
Page 52 of 469
is used by the TE. TA is then able to convert character
s
m
obile
2/10/04