At^sgconf Configuration Of Gprs Related Parameters - Siemens MC55 Command Set

MC55 AT Command Set
10.13 AT^SGCONF
10.13

AT^SGCONF Configuration of GPRS related Parameters

Syntax
Test Command
AT^SGCONF=?
Response(s)
^SGCONF: (list of supported
OK
Read Command
AT^SGCONF?
Response(s)
^SGCONF: <llc_pdu_length>
OK
Write Command
AT^SGCONF= [
<llc_pdu_length>
Response(s)
OK
ERROR
+CME ERROR
PIN ASC0 ASC1 MUX1
! % %
Reference(s)
SIEMENS
Parameter Description
(num)
<llc_pdu_length>
LLC-PDU-length
0
(P)
140...1520
(num)
<class>
GPRS Multislot Class. The parameter can be changed only when the MT is detached, otherwise ''CME ERROR:
operation temporary not allowed'' will be returned. The value can be one of the classes indicated with the Test
command.
MC55_ATC_V01.05
Confidential / Released
<llc_pdu_length>
,
<class>
] [, ]
<class>
MUX2 MUX3
% % %
no negotiation with network (500 will be used)
lower values diminish performance
Page 269 of 469
s), (list of supported
<class>
s
m
obile
es)
2/10/04