Siemens MC55 Command Set page 384

MC55 AT Command Set
15.7 AT^SPBG
Command Description
The test command returns the index range for this command, the maximum length of
maximum length of
<text>
Note: The length may not be available while SIM storage is selected. If storage does not offer format information,
the format list should be empty parenthesises.
The write command selects the index of the phonebook entry, that is to be displayed, in the sorted list of phone-
book, or the range of indices to display.
If no is given, only the entry at
<index2>
If parameter
<RealLocReq>
. If
tion> <RealLocReq>
The indices displayed in the first parameter of the write command response are indices in the sorted list of
entries, and not related to the entries' location in the phonebook. They may not be used for other phonebook
commands or
ATD><mem><n>
Parameter Description
(num)
<index1>
The first index number within the sorted list of phonebook for which the corresponding entry is to be displayed.
The supported range is given in the test command response.
If <index 1> exceeds the upper bound
(num)
<index2>
The last index number within the sorted list of phonebook for which the corresponding entry is to be displayed.
The supported range is given in the test command response.
If both and
<index1> <index2>
of entries will be output and terminated with OK.
If exceeds the range indicated by the test command in parameter
<index2>
output but terminated with a +CME ERROR 21 "INVALID INDEX".
(num)
<RealLocReq>
Is a display of the "real"
[0]
1
(str)
<number>
String type phone number in format specified by
The number parameter may be an empty string.
(num)
<type>
type of address octet
145
209
129
MC55_ATC_V01.05
Confidential / Released
field.
<index1>
=1, the actual location of the entry displayed will be indicated in parameter
is omitted or
<RealLocReq>
. Instead, parameter
, the AT command will return a CME ERROR 21.
<used>
are in the range indicated by the test command in parameter
of the entry required?
<location>
Do not display an entry's "real" location number. Parameter
not be displayed.
Display the "real" location number as parameter
entry.
<type>
dialling string
<number>
dialling string
<number>
ters saved with the number string.
For further detail, check the parameter descriptions for at command
otherwise
Page 384 of 469
will be displayed.
=0, parameter
<location>
must be used for these purposes.
<location>
.
includes international access code character '+'
contains printable non-alphabetic non-digit charac-
s
m
obile
field, and the
<number>
will not be displayed.
<used>
, the list of entries will be
<used>
<location>
at the end of the
<location>
AT+CPBW
<loca-
, the list
will
.
2/10/04