At^spic Display Pin Counter - Siemens MC55 Command Set

MC55 AT Command Set
5.3 AT^SPIC
5.3

AT^SPIC Display PIN counter

Syntax
Test Command
AT^SPIC=?
Response(s)
OK
Read Command
AT^SPIC?
Response(s)
^SPIC: <code>
OK
Exec Command
AT^SPIC
Response(s)
^SPIC: <counter>
OK
Write Command
AT^SPIC=<facility>
Response(s)
^SPIC: <counter>
OK
PIN ASC0 ASC1 MUX1
! % %
Reference(s)
SIEMENS
Command Description
The read command returns an identification of the currently required password, e.g. the PIN, PUK, PH-SIM PUK
etc. The returned by the execute command refers to this password. In case there is no currently
<counter>
required password (the responses to "
nevertheless identifies the password to which the execute command response refers.
The execute command returns the number of attempts still available for entering the currently required password,
e.g. the PIN, PUK, PH-SIM PUK etc. To check whether or not you need to enter a password usecommands
? , Read command
AT+CPIN
MC55_ATC_V01.05
Confidential / Released
MUX2 MUX3
% % %
?" and "
AT+CPIN
? and
AT^SPIC AT+CPIN2
Page 110 of 469
?" both read "READY"), the read command
AT+CPIN2
?.
s
m
obile
2/10/04