Siemens MC55 Command Set page 265

Hide thumbs Also See for MC55:
Table of Contents

Advertisement

MC55 AT Command Set
10.10 AT+CGREG
Parameter Description
(num)
<n>
(P)
0
1
(num)
<stat>
0
1
2
3
4
5
Note
When the module is GPRS attached and a PLMN reselection occurs to a non-GPRS capable network or to a
network where the SIM is not subscribed to for using GPRS, the resulting GMM (GPRS mobility management)
state according to GSM 24.008 is REGISTERED/NO CELL, meaning that the read command will still show
=1 or
<stat>
<stat>
MC55_ATC_V01.05
Confidential / Released
disable network registration unsolicited result code
enable network registration unsolicited result code "
not registered, ME is not currently searching an operator to register to the MS
is in GMM state GMM-NULL or GMM-DEREGISTERED-INITIATED.
The GPRS service is disabled, the MS is allowed to attach for GPRS if re-
quested by the user.
registered, home networkThe MS is in GMM state GMM-REGISTERED or
GMM-ROUTING-AREA-UPDATING-INITIATED INITIATED on the home
PLMN
not registered, but ME is currently trying to attach or searching an operator to
register to. The MS is in GMM state GMM-DEREGISTERED or GMM-REGIS-
TERED-INITIATED. The GPRS service is enabled, but an allowable PLMN is
currently not available. The MS will start a GPRS attach as soon as an allow-
able PLMN is available
registration denied. The MS is in GMM state GMM-NULL. The GPRS service
is disabled, the MS is not allowed to attach for GPRS if requested by the user
unknown
registered, roaming. The MS is in GMM state GMM-REGISTERED or GMM-
ROUTING-AREA-UPDATING-INITIATED on a visited PLMN
=5.
Page 265 of 469
s
m
obile
"
+CGREG
2/10/04

Advertisement

Table of Contents
loading

Table of Contents