Table of Contents
Advertisement
MC55 AT Command Set
15.7 AT^SPBG
15.7
AT^SPBG Read current Phonebook entries
This command can be used to display the phonebook records of the phonebook currently selected with
in sorted order by name. The sort order is described in
There are two ways to use command
•
If the optional parameter
index of their own which is not identical with the location numbers used in the various phonebooks.
In this case, command
with matching characters. Do not use the listed index numbers to dial out or modify entries.
•
To access an entry found with
=1.
cReq>
Then extract the "real" location number of the entry from response parameter
"real" location number with
This command can be used only after the phonebook data from the SIM have been read successfully for the first
time. Reading starts after successful SIM authentication has been performed, and may take up to 30 seconds
depending on the SIM used. While the read process is in progress, an attempt to use any of the phonebook com-
mands will result in "+CME Error: 14" (SIM busy).
Syntax
Test Command
AT^SPBG=?
Response(s)
^SPBG: (1-
),
<used>
<nlength>
OK
ERROR
+CME ERROR
Write Command
[,
AT^SPBG=<index1>
Response(s)
[ ^SPBG:
,
<index1>
<number>
[ ^SPBG:
,
<index2>
<number>
OK
ERROR
+CME ERROR
PIN
ASC0
ASC1
MUX1
%
%
%
Reference(s)
SIEMENS
MC55_ATC_V01.05
Confidential / Released
:
AT^SPBG
is omitted: Please note that the sorted entries are assigned an
<RealLocReq>
can be used for reading only. For example, it helps you find entries starting
AT^SPBG
for editing or dialing, enter
AT^SPBG
or
ATD><mem><n>
,
<tlength>
][,
<index2>
<RealLocReq>
,
,
<type>
<text>
,
,
<type>
<text>
MUX2
MUX3
%
%
%
Page 383 of 469
Chapter 15.1, page
AT^SPBG
.
AT+CPBW
]
[,
] ]
<location>
[,
] ]
<location>
s
m
370, "Sort order for Phonebooks".
with the parameter
and use this
<location>
obile
AT+CPBS
<RealLo-
2/10/04
Advertisement
Table of Contents
