MC55 AT Command Set
12.10 AT+CNMA
Notes
•
The execute / write command shall only be used when
2+).
•
Both the execute and the write command can be used no matter whether text mode or PDU mode is activated.
•
If multiplex mode is activated (
channel fails to acknowledge an incoming message within the required time.
MC55_ATC_V01.05
Confidential / Released
=0) the
AT+CMUX
AT+CNMI
Page 329 of 469
parameter
AT+CSMS
<service>
parameter will be set to zero on all channels, if one
s
m
obile
equals 1 (= phase
2/10/04