Table of Contents
Advertisement
MC55 AT Command Set
3.5 ATS18
3.5
ATS18 Extended call release report
Syntax
Read Command
ATS18?
Response(s)
<n>
OK
Write Command
ATS18=<n>
Response(s)
OK
PIN
ASC0
ASC1
MUX1
!
%
!
Reference(s)
V.25ter
Command Description
This command enables or disables the presentation of extended call release reports for fax and data calls. The
call release report is presented in numeric format and includes the following parameters:
+CAUSE: <locationID>,
If enabled the message will be reported every time a fax or data call is released or fails to be established.
Parameter Description
(num)(&W)(&V)
<n>
An odd number enables the presentation of the extended call release report. An even number disables this fea-
ture.
(&F)
0
...255
(num)
<locationID>
Location ID as number code (see also
Each ID is related to another table that contains a list of
(num)
<reason>
Reason for last call release as number code (see also
associated descriptions are listed in several tables, sorted by different categories in Chapter
tables can be found proceeding from the Location IDs listed in 3.4.1.
MC55_ATC_V01.05
Confidential / Released
MUX2
MUX3
%
!
!
<reason>
<locationID>
Page 85 of 469
of
). Location IDs are listed in section 3.4.1.
AT+CEER
s.
<reason>
of
).
<reason>
AT+CEER
s
m
obile
numbers and the
<reason>
. The
AT+CEER
2/10/04
Advertisement
Table of Contents
