Siemens MC55 Command Set page 320

MC55 AT Command Set
12.5 AT+CMGL
PIN ASC0 ASC1 MUX1
% % %
Reference(s)
GSM 07.05
Command Description
The execute command is the same as the write command with the given default for
The write command returns messages with status value
status of the message is 'received unread', status in the storage changes to 'received read'.
Notes
• The selected
<mem1>
TUS-REPORTs and SMS-COMMANDs), the response may be a mix of the responses of different SM types.
TE application can recognize the response format by examining the third response parameter.
• The parameters
<ra>
set to 1.
• This command can be used only after the SMS data from the SIM have been read successfully for the first
time. Reading starts after successful SIM authentication has been performed, and may take up to 30 seconds
depending on the SIM used. While the read process is in progress, an attempt to use any of the SMS read
commands will result in ''+CME Error: 14'' (SIM busy)
MC55_ATC_V01.05
Confidential / Released
MUX2 MUX3
% % %
can contain different types of SMs (e.g. SMS-DELIVERs, SMS-SUBMITs, SMS-STA-
and will only be displayed if parameter
<tora>
Page 320 of 469
from message storage
<stat>
of the
<ra>
s
m
obile
.
<stat>
to the TE. If
<mem1>
command is
AT^SSCONF
2/10/04