Atd><Str> Originate Call To Phone Number In Memory With Corresponding Field - Siemens MC55 Command Set

MC55 AT Command Set
7.6 ATD><str>
7.6 ATD><str> Originate call to phone number in memory with corre-
sponding field
Syntax
Exec Command
[ ];
ATD><str> <mgsm>
Response(s)
ERROR
+CME ERROR: <err>
If no dialtone (parameter ATX2 or ATX4):
NO DIALTONE
If busy (parameter setting ATX3 or ATX4):
BUSY
If connection cannot be set up:
NO CARRIER
When TA returns to command mode after call release:
OK
If successfully connected:
OK
PIN ASC0 ASC1 MUX1
% % §
Reference(s)
V.25ter
Command Description
This command searches the active phonebook for a given string
The termination character ";" is mandatory since dialing from a phonebook is only supported for voice calls and
for sending *# codes of Supplementary Services or other functions.
Parameter Description
(str)(+CSCS)
<str>
String type value ("x"), which should equal an alphanumeric field in at least one phonebook entry in the searched
memories; used character set should be the one selected with
as described in chapter "
must be wrapped in quotation marks (""), if escape sequences or parameter
<str>
alphanumeric strings contains a blank. If not, quotation marks are optional.
(str)
<mgsm>
String of GSM modifiers:
I Activates CLIR (disables presentation of own phone number to called party)
i Deactivates CLIR (enables presentation of own phone number to called party)
MC55_ATC_V01.05
Confidential / Released
MUX2 MUX3
% § §
Supported character sets
Page 147 of 469
and dials the assigned phone number.
<str>
. can contain escape sequences
AT+CSCS <str>
".
s
m
obile
are used or if the
<mgsm>
2/10/04