Table of Contents
Advertisement
MC55 AT Command Set
7.23 AT^SLCC
^SLCC: 2,0,2,0,0,1,"23456",129
^SLCC:
^SLCC:
1,0,1,0,0,0,''1234567'',129,''Called
Party''
^SLCC: 2,0,2,0,0,1,"23456",129
^SLCC:
^SLCC:
1,0,1,0,0,0,''1234567'',129,''Called
Party''
^SLCC: 2,0,3,0,0,1,"23456",129
^SLCC:
^SLCC:
1,0,0,0,0,1,''1234567'',129,''Called
Party''
^SLCC:
NO CARRIER
^SLCC:
NO CARRIER
EXAMPLE 2
^SLCC: 1,1,4,0,0,1,''1234567'',129
^SLCC:
RING
^SLCC: 1,1,4,0,0,1,''1234567'',129
^SLCC:
RING
ata
OK
^SLCC: 1,1,0,0,0,1,''1234567'',129
^SLCC:
ath
OK
^SLCC:
MC55_ATC_V01.05
Confidential / Released
The second call has already started before the indi-
cation for the held call could be displayed
End of current list
The identical list is displayed again, triggered by the
start of the second voice call
The status of the second list entry has already been
displayed with the previous URC
End of current list
The held call doesn't change status right now
The second call is now alerting the B-Party
End of current list
The held call doesn't change status right now
End of current list: the B-Party of the second call has
not accepted the call in time, the second call has
ended.
The second call has ended
list is now empty: B-Party has ended the first call
The first call has ended
Incoming call is signalled.
Display is triggered by the incoming call, but the cur-
rent status of the call at the time of display already
comprises an active traffic channel.
End of current list
Incoming call is signalled.
The incoming call had a traffic channel assigned
from the start.
This second identical display is triggered by the traf-
fic channel assignment.
Since the traffic channel was already indicated in the
previous URC, both instances of the URC contain
identical information.
End of current list
Incoming call is signalled.
Incoming call is accepted.
call is established.
The call is now active.
End of current list
Hang up the call.
hang up complete.
The list of current calls is empty again
Page 175 of 469
s
m
obile
2/10/04
Advertisement
Table of Contents
