Table of Contents
Advertisement
MC55 AT Command Set
7.23 AT^SLCC
7
8
9
(num)
<mpty>
0
1
<traffic channel assigned>
0
1
(str)
<number>
phone number in format specified by
(num)
<type>
type of address octect
145
129
(str)
<alpha>
Alphanumeric representation of
should be the one selected with command
The maximum displayed length of
first 15 characters will be displayed. To indicate an overflow, a special character will be used as the 16th char-
acter. This will be a space if the character set selected with
'UCS2'.
Due to time constraints on the necessary evaluation of the phonebook, this parameter may show a default value
during early call phases (e.g. for
present for the number concerned.
Notes
•
Teleservices other than voice, data, fax are not fully supported by ME. They are used only in connection with
the handling for
AT+CSNS
•
If a URC "
" in verbose mode (see
^SLCC
mode (depending on the settings of
as a separate URC after the interface returns to idle mode.
However, the output will deliver the list of current calls in the "current" state (at the time when the output is
generated), possibly leading to multiple displays of identical list configurations.
•
Some parameters of AT command AT+CHLD, as well as some situations where the call status in the network
changes very quickly (e.g. the transition between
reachable subscriber within the registered network) may lead to quasi-simultaneous changes to the states of
one or several calls in the list, possibly leading to multiple displays of identical list configurations.
MC55_ATC_V01.05
Confidential / Released
alternating voice/data, data mode (only in connection with single numbering
scheme
)
AT+CSNS
alternating voice/fax, fax mode (only in connection with single numbering
scheme
)
AT+CSNS
unknown
call is not one of multiparty (conference) call parties
call is one of multiparty (conference) call parties
(num)
No traffic channel is available to the call
mobile has been assigned a traffic channel.
It is now possible to send or receive inband information, e.g. to send DTMF
tones (cf.
), or to receive network announcements.
AT+VTS
<type>
dialing string
<number>
otherwise
corresponding to the entry found in phonebook; used character set
<number>
AT+CSCS
is 16 characters. If
<alpha>
= ''dialing'', ''incoming'' or ''alerting''), even if a phonebook entry is
<stat>
, and may therefore occur in parameter
AT^SCFG
parameter
AT+CMER
<stat>
Page 173 of 469
includes international access code character '+'
(Select TE Character Set).
has more than 16 characters, only the
<alpha>
is 'GSM', or 'E400' if the character set is
AT+CSCS
for mobile terminated calls.
<mode>
) has been buffered while the interface was in dedicated
), each buffered event indicator will be output
<bfr>
= ''unknown'', ''dialing'' and ''alerting'' for a call to a
s
m
obile
2/10/04
Advertisement
Table of Contents
