At+Fdt Data Transmission - Siemens MC55 Command Set

MC55 AT Command Set
11.13 AT+FDT
11.13

AT+FDT Data Transmission

Syntax
Exec Command
AT+FDT
Response(s)
CONNECT
Write Command
, ,
AT+FDT=<df> <vr> <wd>
Response(s)
CONNECT
PIN ASC0 ASC1 MUX1
! % !
Reference(s)
EIA PN-2388
Command Description
This command requests the ME to transmit a Phase C page. When the ME is ready to accept Phase C data, it
issues the negotiation responses and the CONNECT result code to the application.
In Phase B, the command releases the ME to proceed with negotiation, and releases the DCS message
AT+FDT
to the remote station. In Phase C, the
transmited before.
Note
• Used for Fax Class 2 only
MC55_ATC_V01.05
Confidential / Released
,
<ln>
MUX2 MUX3
% ! !
command resumes transmission after the end of a data stream
AT+FDT
Page 296 of 469
s
m
obile
2/10/04