Table of Contents
Advertisement
MC55 AT Command Set
10.8 AT+CGQMIN
10.8
AT+CGQMIN Quality of Service Profile (Minimum acceptable)
Syntax
Test Command
AT+CGQMIN=?
Response(s)
+CGQMIN:
<PDP_type>
supported
<reliability>
OK
ERROR
+CME ERROR
Read Command
AT+CGQMIN?
Response(s)
,
+CGQMIN:
<cid>
<precedence>
...
OK
ERROR
+CME ERROR
Write Command
AT+CGQMIN= [
[,
<cid>
<precedence>
Response(s)
OK
ERROR
+CME ERROR
PIN
ASC0
ASC1
MUX1
%
%
%
Reference(s)
GSM 07.07
Command Description
The test command returns values supported as a compound value. If the MT supports several PDP types, the
parameter value ranges for each PDP type are returned on a separate line.
The read command returns the current settings for each defined context. If no minimum profile was explicitly
specified for a context, simply OK will be returned, but default values will be used for that context.
This command allows the TE to specify a minimum acceptable profile which is checked by the MT against the
negotiated profile returned in the Activate PDP Context Accept message.
The set command specifies a profile for the context identified by the (local) context identification parameter,
MC55_ATC_V01.05
Confidential / Released
, (list of supported
<precedence>
s), (list of supported
<peak>
,
,
<delay>
<reliability>
[,
<delay>
MUX2
MUX3
%
%
%
Page 256 of 469
s), (list of supported
s), (list of supported
,
<peak>
[,
[,
<reliability>
<peak>
s
m
s), (list of
<delay>
s)
<mean>
,
<mean>
[,
]]]]]]
<mean>
obile
2/10/04
Advertisement
Table of Contents
