Table of Contents
Advertisement
MC55 AT Command Set
8.9 AT^SALS
The write command enables or disables the presentation mode of
Parameter Description
(num)
<view>
Controls the presentation mode of the URC "^SALS" which indicates the line number used by an incoming call:
(&F)
0
1
(num)
<line>
Selects the line to be used for outgoing calls.
[1]
2
Notes
•
The selected
<line>
•
The
will be reset by
<line>
•
The
will be reset after Power Down as well as by
<view>
•
If a non ALS SIM is inserted, the
Example
AT^SALS=1,1
RING
^SALS: 2
MC55_ATC_V01.05
Confidential / Released
Disables indication of the called line
Enables indication of the called line
ALS Line 1
ALS Line 2
will be saved at non-volatile Flash memory and thus retained after Power Down.
and
and afterwards saved at non-volatile memory too.
AT&F
ATZ
will be reset to line 1 as well.
<line>
Line 1 has been selected for outgoing calls. "^SALS" URC is enabled.
You receive a notification that you have an incoming call on line 2.
Page 206 of 469
and selects the preferred
<view>
or
.
ATZ
AT&F
s
m
obile
.
<line>
2/10/04
Advertisement
Table of Contents
