At+Ilrr Set Te-Ta Local Rate Reporting - Siemens MC55 Command Set

MC55 AT Command Set
4.6 AT+ILRR
4.6

AT+ILRR Set TE-TA local rate reporting

The command
AT+ILRR
DCE to the DTE.
Syntax
Test Command
AT+ILRR=?
Response(s)
+ILRR: (list of supported
OK
Read Command
AT+ILRR?
Response(s)
+ILRR: <value>
OK
Write Command
AT+ILRR=<value>
Response(s)
OK
ERROR
+CME ERROR
PIN ASC0 ASC1 MUX1
% % !
Reference(s)
V.25ter
Intermediate Result Code
+ILRR: <rate>
Indicates port rate setting on connection.
Command Description
The write command determines whether or not an intermediate result code of local rate is reported at connection
setup. The rate is reported before the final result code of the connection is transmitted to the TE.
MC55_ATC_V01.05
Confidential / Released
controls whether or not the intermediate result code "
s)
<value>
MUX2 MUX3
% ! !
Page 94 of 469
s
m
obile
" is transmitted from the
+ILRR
2/10/04