At+Fdffc Data Compression Format Conversion - Siemens MC55 Command Set

MC55 AT Command Set
11.10 AT+FDFFC
11.10

AT+FDFFC Data Compression Format Conversion

Syntax
Test Command
AT+FDFFC=?
Response(s)
(list of s)
<df>
OK
Read Command
AT+FDFFC?
Response(s)
<df>
OK
Write Command
AT+FDFFC=<df>
Response(s)
OK
PIN ASC0 ASC1 MUX1
! % !
Reference(s)
EIA PN-2388
Command Description
This parameter determines the ME response to a mismatch between the data format negotiated for the fax ses-
sion, reported by the
<df>
by the optional
AT+FDT <df>
Parameter Description
(num)
<df>
[0]
Notes
• For further information see
• Used for Fax Class 2 only.
MC55_ATC_V01.05
Confidential / Released
MUX2 MUX3
% ! !
subparameter, and the Phase C data desired by the controlling application, indicated
subparameter, or the
Mismatch checking is always disabled. The controlling application has to check
the subparameter and transfer matching data.
<df>
.
AT+FDIS
Page 293 of 469
subparameter for
AT+FDIS <df>
s
m
obile
operation.
AT+FDR
2/10/04