Table of Contents
Advertisement
MC55 AT Command Set
7.23 AT^SLCC
•
If multiple displays of identical list configurations occur, this happens because of intermediate states of the
list, that have already been overridden by new transitions and states. Thus, it is guaranteed that the configu-
ration displayed in such cases is the current configuration at the time of the last display.
•
It is adviseable to receive URC "
configured. If only voice calls are expected, a setting of
keep the call from blocking the interface.
Examples
EXAMPLE 1
^SYSSTART
at+cpin=9999
OK
+CREG: 2
+CREG: 1,''0145'',''0016''
at^sm20=0
OK
atd''1234567'';
OK
^SLCC:
1,0,2,0,0,0,''1234567'',129,''Called
Party''
^SLCC:
^SLCC:
1,0,2,0,0,1,''1234567'',129,''Called
Party''
^SLCC:
^SLCC:
1,0,3,0,0,1,''1234567'',129,''Called
Party''
^SLCC:
^SLCC:
1,0,0,0,0,1,''1234567'',129,''Called
Party''
^SLCC:
atd23456;
OK
^SLCC:
1,0,1,0,0,0,''1234567'',129,''Called
Party''
MC55_ATC_V01.05
Confidential / Released
" on an interface that is not used for call initiation, if verbose output is
^SLCC
We are now registered
command ''ATD'' for an outgoing voice call will termi-
nate immediately with response ''OK''
We start a voice call.
''OK'' response is issued immediately because of set-
ting ''^SM20=0''
MO call starts, paging B-party
End of current list
Traffic channel established,
network may now transmit network announcements,
ME may now transmit DTMF tones.
End of current list
Call is now ringing at B-Party
End of current list
B-Party has accepted the call, connection estab-
lished
End of current list
We start a second voice call.
''OK'' response is issued immediately because
another call is already active (cf.
The active call is automatically put on hold, triggering
the display of the list
Page 174 of 469
= 0 may be used alternatively in order to
AT^SM20
s
m
obile
)
ATD
2/10/04
Advertisement
Table of Contents
