At+Fvrfc Vertical Resolution Format Conversion - Siemens MC55 Command Set

MC55 AT Command Set
11.28 AT+FVRFC
11.28

AT+FVRFC Vertical resolution format conversion

Syntax
Test Command
AT+FVRFC=?
Response(s)
(list of supported
<vrfc>
OK
Read Command
AT+FVRFC?
Response(s)
<vrfc>
OK
Write Command
AT+FVRFC=<vrfc>
Response(s)
OK
PIN ASC0 ASC1 MUX1
! % !
Reference(s)
EIA PN-2388
Command Description
This command determines the DCE response to a mismatch between the vertical resolution negotiated for the
facsimile session and the Phase C data desired by the DTE.
Parameter Description
(num)
<vrfc>
0
[2]
Note
• Used for Fax Class 2 only
MC55_ATC_V01.05
Confidential / Released
s)
MUX2 MUX3
% ! !
Disable mismatch checking.
Enable mismatch checking, with resolution conversion of 1-D data in the DCE,
and an implied
AT+FK
Page 311 of 469
command executed on 2-D mismatch detection.
s
m
obile
2/10/04