Table of Contents
Advertisement
MC55 AT Command Set
11.2 AT+FBADLIN
11.2
AT+FBADLIN Bad Line Threshold
Syntax
Read Command
AT+FBADLIN?
Response(s)
<badlin>
OK
Write Command
AT+FBADLIN=<badlin>
Response(s)
OK
If error is related to ME functionality
ERROR
PIN
ASC0
ASC1
MUX1
!
%
!
Reference(s)
EIA PN-2388
Command Description
This command defines the Copy-Quality-OK-threshold. If
in normal resolution (98 dpi) mode, then the copy quality is unacceptable. If
pixel count errors in fine resolution (196 dpi) mode, then the copy quality is unacceptable. "Copy Quality Not OK"
occurs if either the error percentage is too high or too many consecutive lines contain errors. A value of 0 implies
that error checking is not present or disabled.
Parameter Description
(num)
<badlin>
bad lines
(P)
0...10
...255
Note
•
Used for Fax Class 2 only
MC55_ATC_V01.05
Confidential / Released
MUX2
MUX3
%
!
!
Page 284 of 469
consecutive lines have pixel count errors
<badlin>
<badlin>
s
m
obile
* 2 consecutive lines have
2/10/04
Advertisement
Table of Contents
