Using The Gprs Dial Command Atd - Siemens MC55 Command Set

Hide thumbs Also See for MC55:

Table of Contents

MC55 AT Command Set

10.20 Using the GPRS dial command ATD

Using the GPRS dial command ATD

In addition to the GPRS AT commands you can use the "D" command to dial into to the GPRS network.

There are two GPRS Service Codes for the ATD command: Values 98 and 99.

ATD*99*123.124.125.126*PPP*1#

ATD*99**PPP#

ATD*99**PPP*1#

MC55_ATC_V01.05

Confidential / Released

Establish a connection by service code 99.

Establish a connection by service code 99, IP

address 123 and L2P = PPP and using CID 1.

The CID has to be defined by

Establish a connection by service code 99 and L2P

Establish a connection by service code 99 and using

Establish a connection by service code 99 and L2P

= PPP and using CID 1. The CID has to be defined

Establish a connection by service code 98.

Establish an IP connection by service code 98 using

CID 1. The CID has to be defined by

Page 280 of 469